NEXCOM nTUF 600 - Manual (Page 92)

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. 78 nTUF 600 User Manual
Chapter 4: BIOS Setup
Security Advanced Boot Chipset PCIPnP Main
v02.61 (C) Copyright 1985-2006, American Megatrends, Inc.
BIOS SETUP UTILITY
← Select Screen
↑↓ Select Item
+/- Change Field
Tab Select Field
F1 General Help
F10 Save & Exit
ESC Exit
Disabled
2 USB Ports
4 USB Ports
6 USB Ports
8 USB Ports
South Bridge Chipset Configuration
USB Functions [8 USB Ports]
USB 2.0 Controller [Enabled]
HDA Controller [Enabled]
SMBUS Controller [Enabled]
Restore on AC Power Loss
POWER TYPE
PCIE Ports Configuration
Onboard LAN 1
Onboard LAN2
MINI PCIE port [Auto]
Exit
Options
South Bridge Configuration
This section is used to configure the south bridge features.
USB Functions
Enables or disables USB devices.
USB 2.0 Controller
This field is used to enable or disable the Enhanced Host Controller Interface
(USB 2.0).
Options
Disabled
2 USB Ports
4 USB Ports
6 USB Ports
8 USB Ports
HDA Controller
Enables or disables the onboard audio.
SMBUS Controller
Enables or disables the SMBUS.
Restore On AC Power Loss
Power Off
When power returns after an AC power failure, the
system’s power is off. You must press the Power button
to power-on the system.
Power On When power returns after an AC power failure, the system
will automatically power-on.
Last State When power returns after an AC power failure, the system
will return to the state where you left off before power
failure occurs. If the system’s power is off when AC power
failure occurs, it will remain off when power returns. If the
system’s power is on when AC power failure occurs, the
system will power-on when power returns.
Onboard LAN 1 to Onboard LAN 2
Enables or disables the onboard LAN 1 and LAN 2 controllers.
MINI PCIE Port
Enables or disables the mini PCIe controller.