NEXCOM nTUF 600 - Manual (Page 85)

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. 71 nTUF 600 User Manual
Chapter 4: BIOS Setup
Exit Advanced Chipset PCIPnP Security Main
v02.61 (C) Copyright 1985-2006, American Megatrends, Inc.
BIOS SETUP UTILITY
← Select Screen
↑↓ Select Item
+/- Change Field
Tab Select Field
F1 General Help
F10 Save & Exit
ESC Exit
Select the ACPI state used for
System Suspend
ACPI Settings
Suspend mode
ACPI APIC support
Options
S1 (POS)
S3 (STR)
[S1 (POS)]
[Enabled]
ACPI Configuration
This section is used to configure ACPI Settings.
Suspend Mode
Selects the ACPI state used for system suspend, S1 (POS) enables the Power
On Suspend function. S3 (STR) enables the Suspend to RAM function.
ACPI APIC support
Enables or disables the motherboard's Advanced Programmable Interrupt
Controller (APIC).
Exit Advanced Chipset PCIPnP Security Main
v02.61 (C) Copyright 1985-2006, American Megatrends, Inc.
BIOS SETUP UTILITY
← Select Screen
↑↓ Select Item
+/- Change Field
Tab Select Field
F1 General Help
F10 Save & Exit
ESC Exit
Allows BIOS to Select Serial
Port1 Base Addresses.
Configure Ite8783 Super IO Chipset
Serial Port1 Address
Serial Port1 IRQ
Serial Port1 Frequency Mode
Serial Port1 Frequency selec
Serial Port2 Address
Serial Port2 IRQ
Serial Port2 Frequency Mode
Serial Port2 Frequency selec
Serial Port3 Address
Serial Port3 IRQ
Serial Port3 Frequency Mode
Serial Port3 Frequency selec
Serial Port4 Address
Serial Port4 IRQ
Serial Port4 Frequency Mode
Serial Port4 Frequency selec
Serial Port5 Address
Serial Port5 IRQ
Serial Port6 Address
Serial Port6 IRQ
[3F8]
[4]
[RS422]
[115200 bps]
[2F8]
[3]
[RS422]
[115200 bps]
[3E8]
[5]
[RS422]
[115200 bps]
[2E8]
[7]
[RS422]
[115200 bps]
[2F0]
[10]
[2E0]
[11]
Super IO Configuration
This section is used to configure the I/O functions supported by the onboard
Super I/O chip.
Serial Port1 Address to Serial Port6 Address
Auto
The system will automatically select an I/O address for the onboard serial
port.
3F8, 2F8, 3E8, 2E8, 2F0, 2E0
Allows you to manually select an I/O address for the onboard serial port.
Disabled
Disables the onboard serial port.
abled Disables the onboard serial port.