NEXCOM nTUF 600 User Manual

Page 19

Text mode
Original mode

nTUF 600 User Manual

Chapter 1: Product Introduction

Fuse

A 10A fuse used to protect the system from overcurrent.

HDD Tray

Hard drive trays to install hard drives on.

HDMI

Used to connect a high-definition display. HDMI display output is active only
when MXM Graphic card is installed. In addition, the air ventilation holes are
necessary if MXM graphic card is installed.

DVI-D

Used to connect a digital LCD panel. DVI-D display output is active only
when MXM Graphic card is installed. In addition, the air ventilation holes are
necessary if MXM graphic card is installed.

M12 LAN Port

Dual M12 LAN ports used to connect the system to a local area network.

CFast Socket

Used to insert a CFast card.

Power/HDD/LAN LED

Indicates the power status, hard drive and LAN activity of the system.

Power Switch

Press to power-on or power-off the system.