NEXCOM nTUF 600 - Manual (Page 70)

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. 56 nTUF 600 User Manual
Chapter 4: BIOS Setup
IDE Configuration
This section is used to configure IDE devices.
ATA/IDE Configuration
This field is used to configure the IDE drives. The options are Disabled,
Compatible and Enhanced.
Configure SATA as
IDE
This option configures the Serial ATA drives as Parallel ATA physical
storage device.
AHCI This option configures the Serial ATA drives to use AHCI (Advanced
Host Controller Interface). AHCI allows the storage driver
to enable the advanced Serial ATA features which will increase
storage performance.
Advanced
v02.61 (C) Copyright 1985-2006, American Megatrends, Inc.
BIOS SETUP UTILITY
← Select Screen
↑↓ Select Item
+/- Change Field
Tab Select Field
F1 General Help
F10 Save & Exit
ESC Exit
Disabled
Compatible
Enhanced
IDE Configuration
ATA/IDE Configuration
Configure SATA as
► Primary IDE Master
► Primary IDE Slave
► Secondary IDE Master
IDE Detect Time Out (Sec)
[Enhanced]
[IDE]
: [TS64GSSD25S-S]
: [TS46GCFX500I]
: [TOSHIBA MK167]
[35]
Options
Disabled
Compatible
Enhanced
Options
Primary IDE Master to Third IDE Master
When you enter the BIOS Setup Utility, the BIOS will auto detect the existing
IDE devices then displays the status of the detected devices. To configure
an IDE drive, move the cursor to a field then press .
IDE Detect Time Out (Sec)
Selects the time out value for detecting ATA/ATAPI devices.
Advanced
v02.61 (C) Copyright 1985-2006, American Megatrends, Inc.
BIOS SETUP UTILITY
← Select Screen
↑↓ Select Item
+/- Change Field
Tab Select Field
F1 General Help
F10 Save & Exit
ESC Exit
Select the time out value for
detecting ATA/ATAPI device(s).
IDE Configuration
ATA/IDE Configuration
Configure SATA as
► Primary IDE Master
► Primary IDE Slave
► Secondary IDE Master
IDE Detect Time Out (Sec)
[Enhanced]
[IDE]
: [TS64GSSD25S-S]
: [TS46GCFX500I]
: [TOSHIBA MK167]
[35]
Options
0
5
10
15
20
25
30
35