NEXCOM nTUF 600 - Manual (Page 89)

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. 75 nTUF 600 User Manual
Chapter 4: BIOS Setup
Boot
Security Advanced Boot Chipset PCIPnP Main
v02.61 (C) Copyright 1985-2006, American Megatrends, Inc.
BIOS SETUP UTILITY
← Select Screen
↑↓ Select Item
+/- Change Field
Tab Select Field
F1 General Help
F10 Save & Exit
ESC Exit
Configure Settings during
System Boot. Boot Settings
► Boot Settings Configuration
► Boot Device Priority
► Hard Disk Drives
► Removable Drives
Boot Settings Configuration
This section is used to configure settings during system boot.
Boot Device Priority
This section is used to select the boot priority sequence of the devices.
Hard Disk Drives
This section is used to select the boot priority sequence of the hard drives.
Removable Drives
This section is used to select the boot priority sequence of the removable
drives.
Exit Advanced Boot PCIPnP Security Main
v02.61 (C) Copyright 1985-2006, American Megatrends, Inc.
BIOS SETUP UTILITY
← Select Screen
↑↓ Select Item
+/- Change Field
Tab Select Field
F1 General Help
F10 Save & Exit
ESC Exit
Allows BIOS to skip certain
tests while booting. This will
decrease the time needed to boot
the system.
Boot Settings Configuration
Quick Boot
Quiet Boot
Bootup Num-Lock
PS/2 Mouse Support
System Keyboard
Hit 'DEL' Message Display
Interrupt 19 Capture
[Enabled]
[Disabled]
[On]
[Enabled]
[Present]
[Enabled]
[Disabled]
Boot Settings Configuration
This section is used to configure settings during system boot.
Quick Boot
When Enabled, the BIOS will shorten or skip some check items during
POST. This will decrease the time needed to boot the system.
Quiet Boot
Enabled
Displays OEM logo instead of the POST messages.
Disabled Displays normal POST messages.
Exit