NEXCOM nTUF 600 - Manual (Page 16)

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. 2 nTUF 600 User Manual
Chapter 1: Product Introduction
Hardware Specifications
CPU Support
▪ On-board Intel® Atom™ Dual Core processor D525, 1.8 GHz, 1M cache
▪ Intel® ICH8M PCHs chipset
Main Memory
▪ 1x DDR2 SO-DIMM sockets, support up to 2 GB DDR2 667/ 800 SDRAM,
un-buffered and non-ECC
I/O Interface-Front
▪ ATX power on/off switch
▪ HDD access/ power status LEDs
▪ LAN1 & LAN2 status LEDs
▪ 4x USB2.0 ports
▪ 2x M12 GbE LAN ports
Intel® 82574L GbE LAN controller on board with1.5KV surge protection
▪ 1x VGA output
▪ 1x DVI-D & 1x HDMI (only work when optional MXM 3.0 graphic module
is installed)
▪ Audio jack (speaker-out & Mic-in & Line-in)
▪ 2x antenna holes
▪ 2x DB9, RS232
▪ 2x PS/2 for keyboard & mouse
▪ 2x cold swappable 2.5” HDD tray
▪ 1x external screwed type CFast socket
▪ 3-pin +24V DC input
▪ 1x external fuse;10A
I/O Interface-Rear
▪ 4x Digital Input: 6-pin screw terminals
Voltage level: 5V, TTL-level
▪ 4x Digital Output: 8-pin screw terminals
36V DC with 100mA relay
▪ 4x NMEA 0183 Interfaces
Signal: TX / RX signals
2KV optical isolation protection
Device
▪ 2x 2.5” SSD driver bay
▪ 1x external CFast socket
▪ 1 x mini-PCIe socket
Default: support optional Wi-Fi module
Option: support optional 3.5G module
Power Requirements
▪ DC input range: 16V~30V DC input
▪ Nominal DC input: +24V DC input with 1.5KV isolation protection
▪ Pin definition: Positive, Negative and Chassis Ground
Dimensions
▪ 294mm (W) x 200mm (D) x 100mm (H) (11.6”x 7.9”x 3.94”)
Construction
▪ Aluminum chassis with fanless design