Power consumption measurement – NEXCOM NISE 3140 User Manual

Page 83

Text mode
Original mode

NISE 3140, NISE 3140E, NISE 3140P2, NISE 3140P2E User Manual

Appendix A: Power Consumption

Power Consumption Measurement

Purpose
The purpose of the power consumption test is to verify the power dissipa-
tion of the system and the load of the power supply.

Test Equipment
PROVA CM-07 AC/DC CLAMP METER

Device Under Test
DUT: Sys #1 / Sys #2

Test Procedure
1. Power up the DUT then boot Windows XP.
2. Enter the standby mode (HDD power down).
3. Measure the power consumption and record it.
4. Run the Burn-in test program to apply 100% full loading.
5. Measure the power consumption and record it.

Test Data

Sys #1

Sys #2

+24V

Full-Loading Mode

1.85A

2.35A

Total

43.2W

56.4W

Standby Mode

0.8A

0.78A

Total

19.2W

18.72W

This manual is related to the following products:

NISE 3140E NISE 3140M NISE 3140M2E NISE 3140P2 NISE 3140P2E