Pc health status, Load optimized defaults – NEXCOM NISE 3140 User Manual
Page 79
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
66
NISE 3140, NISE 3140E, NISE 3140P2, NISE 3140P2E User Manual
Chapter 4: BIOS Setup
PC Health Status
Phoenix - AwardBIOS CMOS Setup Utility
PC Health Status
Item Help
Menu Level
↑↓→←
: Move
Enter: Select
F1: General Help
+/-/PU/PD: Value
F10: Save
ESC: Exit
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults
TEMP. Value of Fan START
x TEMP. Value of Fan Full
x Start PWM Value
CPU:Vcore
+3.3V
+5V
+12V
Current CPU Temp.
Current SYS Temp.
Current System FAN1 Speed
Current System FAN2 Speed
CPU:Vcore to Current System FAN2 Speed
These fields will show the output voltage, temperature and fan speed of
the monitored devices or components.
Disabled
75
O
C/167
O
F
0
1.18V
3.32V
4.96V
11.98V
33
O
C
29
O
C
0 RPM
5443 RPM
Load Optimized Defaults
This option opens a dialog box that lets you install optimized defaults for
all appropriate items in the whole setup utility. Press the
do not want to install the defaults. The optimized defaults place demands
on the system that may be greater than the performance level of the com-
ponents, such as the CPU and the memory.
Fatal errors or instability may occur if you install the optimized defaults
when your hardware does not support them. If you only want to install
setup defaults for a specific option, select and display that option, and
then press the
Phoenix - AwardBIOS CMOS Setup Utility
Esc : Quit F9 : Menu in BIOS
F10 : Save & Exit Setup
↑ ↓ → ←
: Select Item
Time, Date, Hard Disk Type...
Standard CMOS Features
Advanced BIOS Features
Integrated Peripherals
Power Management Setup
PnP/PCI Configurations
PC Health Status
Load Optimized Defaults
Set Password
Save & Exit Setup
Exit Without Saving
Load Optimized Defaults (Y/N)? N