Installing a dimm – NEXCOM NISE 3140 User Manual

Page 54

Text mode
Original mode

Chapter 3: System Setup

NISE 3140, NISE 3140E, NISE 3140P2, NISE 3140P2E User Manual

Installing a DIMM

1. Push the ejector tabs which are at the ends of the socket outward. This

indicates that the socket is unlocked.

DIMM

sockets

Ejector

tab

2. Note how the module is keyed to the socket. Grasping the module by

its edges, align the module with the socket so that the “notch” on the
module is aligned with the “key” on the socket. The key ensures the
module can be plugged into the socket in only one direction.

Notch on the

module

Key on the

socket

This manual is related to the following products:

NISE 3140E NISE 3140M NISE 3140M2E NISE 3140P2 NISE 3140P2E