NEXCOM NISE 3140 - Manual (Page 72)

Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 59 NISE 3140, NISE 3140E, NISE 3140P2, NISE 3140P2E User Manual
Chapter 4: BIOS Setup
Integrated Peripherals
Phoenix - AwardBIOS CMOS Setup Utility
Integrated Peripherals
Item Help
Menu Level 
↑↓→← : Move Enter: Select F1: General Help +/-/PU/PD: Value F10: Save ESC: Exit
F5: Previous Values F7: Optimized Defaults

OnChip IDE Device
 SuperIO Device
 USB Device Setting
LAN 1
LAN 2
Onboard LAN Boot ROM
Press Enter
Press Enter
Press Enter
Enabled
Enabled
Disabled
OnChip IDE Device
Move the cursor to this field and press . The following screen will
appear.
Phoenix - AwardBIOS CMOS Setup Utility
OnChip IDE Device
Item Help
Menu Level 
If your IDE hard drive
supports block mode
select Enabled for auto-
matic direction of
the optimal number of
block read/writes per
sector the drive can
support
↑↓→← : Move Enter: Select F1: General Help +/-/PU/PD: Value F10: Save ESC: Exit
F5: Previous Values F7: Optimized Defaults
IDE HDD Block Mode
IDE DMA Transfer Access
IDE Primary Master PIO
IDE Primary Slave PIO
IDE Primary Master UDMA
IDE Primary Slave UDMA
On-Chip Secondary PCI IDE
IDE Secondary Master PIO
IDE Secondary Slave PIO
IDE Secondary Master UDMA
IDE Secondary Slave UDMA
SATA Mode
Enabled
Enabled
Auto
Auto
Auto
Auto
Enabled
Auto
Auto
Auto
Auto
IDE
IDE HDD Block Mode
Enabled
The IDE HDD uses the block mode. The system BIOS will check the
hard disk drive for the maximum block size the system can transfer.
The block size will depend on the type of hard disk drive.
Disabled
The IDE HDD uses the standard mode.
IDE DMA Transfer Access
This field, when Enabled, will enhance the IDE DMA transfer of an
IDE hard disk drive.