NEXCOM NISE 3140 - Manual (Page 77)

Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 64 NISE 3140, NISE 3140E, NISE 3140P2, NISE 3140P2E User Manual
Chapter 4: BIOS Setup
Wake-Up by PCI Card
Enabled
This field should be set to Enabled only if your PCI card such as LAN
card or modem card uses the PCI PME (Power Management Event)
signal to remotely wake up the system. Access to the LAN card or PCI
card will cause the system to wake up. Refer to the card’s documenta-
tion for more information.
Disabled
The system will not wake up despite access to the PCI card.
Power On By Ring
Set this field to Enabled to use the modem ring-on function. This will al-
low your system to power-on to respond to calls coming from an external
modem.
PCI Express PME
This field is used to configure the PCI Express PME.
HPET Support
This field is used to enable or disable HPET.
HPET Mode
The options are 32-bit mode and 64-bit mode.