Installing a sata hard drive – NEXCOM NISE 3140 User Manual
Page 59
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
46
Chapter 3: System Setup
NISE 3140, NISE 3140E, NISE 3140P2, NISE 3140P2E User Manual
Installing a SATA Hard Drive
1. With the bottom side of the chassis facing up, remove the screws of
the bottom cover.
2. Remove the 4 mounting screws that secure the drive bay to the chassis
then remove the drive bay. The drive bay is used to hold a SATA hard
drive.
Mounting
screw
Drive bay
This manual is related to the following products: