NEXCOM NISE 3140 - Manual (Page 70)

Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 57 NISE 3140, NISE 3140E, NISE 3140P2, NISE 3140P2E User Manual
Chapter 4: BIOS Setup
Boot Up NumLock Status
This allows you to determine the default state of the numeric keypad. By
default, the system boots up with NumLock on wherein the function of
the numeric keypad is the number keys. When set to Off, the function of
the numeric keypad is the arrow keys.
Security Option
This field determines when the system will prompt for the password -
everytime the system boots or only when you enter the BIOS setup. Set
the password in the Set Supervisor/User Password submenu.
System
The system will not boot and access to Setup will be denied unless
the correct password is entered at the prompt.
Setup
The system will boot, but access to Setup will be denied unless the
correct password is entered at the prompt.
APIC Mode
This field is used to enable or disable the APIC mode.
Boot Display
This field is used to select the type of display to use when the system
boots.
CRT1
LFP
CRT1 + LFP
CRT2
CRT1 + CRT2
DVI
CRT1+DVI
Panel Type
This field is used to select the type of panel that you are using. The op-
tions are:
640x480 18bit S
800x600 18bit S
1024x768 18bit S
1280x1024 18bit D
1400x1050 18bit D
1280x800 24bit D