Installing the cpu – NEXCOM NISE 3140 User Manual
Page 56
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
43
Chapter 3: System Setup
NISE 3140, NISE 3140E, NISE 3140P2, NISE 3140P2E User Manual
Installing the CPU
1. Loosen the mounting screws that secure the heat sink to the chassis.
Make sure all power cables are unplugged before you install the
•
CPU.
The CPU socket must not come in contact with anything other
•
than the CPU. Avoid unnecessary exposure.
2. The CPU socket is readily accessible after you have removed the heat
sink.
CPU socket
This manual is related to the following products: