NEXCOM NISE 3140 User Manual
Page 60
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
47
Chapter 3: System Setup
NISE 3140, NISE 3140E, NISE 3140P2, NISE 3140P2E User Manual
3. Place the SATA hard drive on the drive bay. Make sure the connector
side of the SATA drive is facing the opening of the drive bay.
Connector side of
the SATA drive
4. Align the mounting holes that are on the sides of the SATA drive with
the mounting holes on the drive bay then use the provided mounting
screws to secure the drive in place.
This manual is related to the following products: