NEXCOM NISE 101 - Manual (Page 62)

Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved. 49 NISE 101 User Manual
Chapter 4: BIOS Setup
Power Management Setup
Power Management Setup lets you control the system power. The system
has various power-saving modes — including powering down the hard
disk, turning off the video, suspending to RAM, and software power down
— that allows the system to automatically resume by certain events.
The power-saving modes can be controlled by timeouts. If the system is
inactive for a time, the timeouts begin counting. If inactivity continues
and reaches the defined timeout period, the system enters a power saving
mode. If any item in the list of Reload Global Timer Events is enabled, then
any activity on that item will reset the timeout counters to zero.
If the system is suspended or has been powered down by software, it can
be resumed by a wake up call that is generated by incoming traffic to a
modem, a LAN card, a PCI card, or a fixed alarm on the system real-time
clock.
Phoenix - AwardBIOS CMOS Setup Utility
Power Management Setup
Item Help
Menu Level

↑↓→← : Move Enter: Select F1: General Help +/-/PU/PD: Value F10: Save ESC: Exit
F5: Previous Values F7: Optimized Defaults
 PCI Express PM Function
ACPI Function
Video Off Method
Video Off In Suspend
MODEM Use IRQ
Soft-Off by PWR-BTTN
Power On by Ring
Resume by Alarm
x Date (of Month) Alarm
x Time (hh:mm:ss) Alarm
Press Enter
Enabled
DPMS
Yes
NA
Instant-Off
Enabled
Disabled
0
0 : 0 : 0
PCI Express PM Function
Phoenix - AwardBIOS CMOS Setup Utility
PCI Express PM Function
Item Help
Menu Level 
↑↓→← : Move Enter: Select F1: General Help +/-/PU/PD: Value F10: Save ESC: Exit
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
PCI Express PME Enabled
PCI Express PME
Enables or disables the PCI Express PME.