Super io device – NEXCOM NISE 101 User Manual
Page 60
Copyright © 2010 NEXCOM International Co., Ltd. All Rights Reserved.
47
NISE 101 User Manual
Chapter 4: BIOS Setup
Super IO Device
Phoenix - AwardBIOS CMOS Setup Utility
Super IO Device
Item Help
Menu Level
↑↓→←
: Move
Enter: Select
F1: General Help
+/-/PU/PD: Value
F10: Save
ESC: Exit
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults
Onboard Serial Port 1
Onboard Serial Port 2
3F8/IRQ4
2F8/IRQ3
Onboard Serial Port 1 and Onboard Serial Port 2
3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3
Allows you to manually select an I/O address for the serial port.
Disabled
Disables the serial port.
USB Device Setting
Phoenix - AwardBIOS CMOS Setup Utility
USB Device Setting
Item Help
Menu Level
[Enable] or [Disable]
Universal Host
Controller Interface
for Universal Serial
Bus.
↑↓→←
: Move
Enter: Select
F1: General Help
+/-/PU/PD: Value
F10: Save
ESC: Exit
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults
USB 1.0 Controller
USB 2.0 Controller
USB Keyboard Function
USB Storage Function
*** USB Mass Storage Device Boot Setting ***
Enabled
Enabled
Enabled
Enabled
USB 1.0 Controller
This field is used to enable or disable the Universal Host Controller
Interface (USB 1.0).
USB 2.0 Controller
This field is used to enable or disable the Enhanced Host Controller
Interface (USB 2.0).