Hapter, Ystem, Etup – NEXCOM NISE 101 User Manual

Page 38

Text mode
Original mode

Chapter 3: System Setup

NISE 101 User Manual

hapter

3: S

yStem

etup

Removing the Chassis Cover

2. Lift up the cover and remove it from the chassis.

Prior to removing the chassis cover, make sure the unit’s power is
off and disconnected from the power sources to prevent electric
shock or system damage.

This chapter will guide you on installing the SODIMM, SATA drive and
CompactFlash card. You need to remove the bottom cover to access the
SODIMM socket, SATA cables and CompactFlash socket.

1. With the bottom side of the chassis facing up, remove the mounting

screws of the bottom cover and then put them in a safe place for later
use.