NEXCOM NISE 101 User Manual

Page 54

NISE 101 User Manual

Chapter 4: BIOS Setup

First Boot Device, Second Boot Device and Third Boot Device

Select the drive to boot first, second and third in the “First Boot Device”
“Second Boot Device” and “Third Boot Device” fields respectively. The
BIOS will boot the operating system according to the sequence of the
drive selected.

The options are:

Hard Disk
CDROM
USB-FDD
USB-ZIP
USB-CDROM
LAN
Disabled

Boot Up NumLock Status

Selects the power on state of the numeric keypad. By default, the system
boots up with NumLock On wherein the function of the numeric keypad
is the number keys. When set to Off, the function of the numeric keypad
is the arrow keys.

Security Option

This field determines when the system will prompt for the password -
everytime the system boots or only when you enter the BIOS setup. Set
the password in the Set Supervisor/User Password submenu.

System
The system will not boot and access to Setup will be denied unless
the correct password is entered at the prompt.
Setup
The system will boot, but access to Setup will be denied unless the
correct password is entered at the prompt.

APIC Mode

This field is used to enable or disable the APIC mode.