Monroe Electronics R189se - Manual (Page 44)

- 39 -
Setup > Audio > Decoder Audio
Decoder Audio Monitoring Configuration
These two interfaces allow a One-Net
SE
user to hear the audio from a selected decoder
input. The Select Decoder Audio to Monitor list presents all of the decoder audio
channels available to hear. The Decoder Audio Monitor Output list allows a specific
output port to be selected to hear the audio chosen in Select Decoder Audio to Monitor.
Choose a decoder channel and select an output port that has speakers (or the Internal
Speaker) and click Accept Changes. To disable audio monitoring, select the None
decoder and/or the None Audio output and again click Accept Changes.
Alert Forwarding Audio Configuration
After the One-Net
SE
decodes an EAS alert, it can be configured to “Forward” the alert.
That is, it can play the alert as audio over a selected audio output. This interface allows