Monroe Electronics R189se - Manual (Page 39)

- 34 -
4.6.1 Output Levels/Tests
The audio output levels for the One-Net
SE
are always configured from this page. Also,
audio tones can be played through each available audio output in order to test the output
and calibrate levels using audio test equipment. Every One-Net
SE
will show the
configuration interface for the Front Panel Speaker, Main Audio and for the Auxiliary
Audio 1. Configure the levels by entering numbers from 0 to 100 for any specific port.
Values near 70 are a good starting point for the One-Net
SE
.