Monroe Electronics R189se - Manual (Page 16)

- 11 -
Setup > Server > Main/License: Web Page, License Key Configuration
Reboot Server?: This option is a full system reboot. The unit will power down and go through
the entire boot process when it starts back up.
Power Off Server?: This option powers down the One-Net.
4.1.1 Main/License
One-Net ID
This is a unique identifier for the actual One-Net
SE
hardware. This is different for every
One-Net
SE
. It cannot be edited.
Server Name
The One-Net
SE
server name can be edited. If changes are made to this value, save them
by clicking Accept Changes.
NOTE: The Restart Server? Button on this page can be clicked to restart
the One-Net
SE
server software. This is used during License Key
configuration. It can also be used at any time the One-Net
SE
appears to
be functioning incorrectly. A confirmation page is displayed before the
restart is actually run. All logged in users will be forced out of the
system and will be required to log back in. Decoding will be temporarily
paused during the restart. This is not a system reboot, but nonetheless:
USE THIS OPTION WITH CARE!