KLING & FREITAG K&F CD Remote - Manual (Page 43)

User's manual K&F CD 44 Remote
KLING & FREITAG GMBH © 2014 Version 5.5 Page 43 of 50
5. In the device window of the virtual controller:
Click on Device » Name.
6. Give the virtual controllers the same name as the corresponding real controllers – in our
examples "Unit 1" and "Unit 2" – and confirm the entry with [OK].
7. In the login window (DeviceList), there is just one device listed for the virtual and the real
controller.
8. Save the Scenario. Scenario » SaveToFile
9. Deactivate the checkbox [Offline] and, instead of that, activate the checkbox [Online]. By
going through this procedure, you switch from the virtual controller to the real controller.