KLING & FREITAG K&F CD Remote - Manual (Page 41)

User's manual K&F CD 44 Remote
KLING & FREITAG GMBH © 2014 Version 5.5 Page 41 of 50
6. Activate the control box Offline. The Device Window opens, and you can edit settings of
the virtual controller. As with an existing controller, you can also create, save and load all
settings.
If you create a virtual controller with the name of a real controller, then only one device
will appear for both controllers in the DeviceList. In this case, you can switch back and forth
between the devices by activating and deactivating the checkbox [Online] or [Offline].
Tip
Please note that from now on, any settings that you edit on the real or virtual controller are
not automatically transferred. If you change the real controller, you must save these changes
and load them in the virtual controller. If you edit the virtual controller, you must also save
these changes in order to load them in the real controller.
17.2 Deleting Virtual Controllers
1. In the main window, click on Offline Devices.
2. Select the virtual controller(s) that you wish to delete in the window Offline Devices.
3. Click on Remove.
4. Close the window Offline Devices.
17.3 Transmitting Settings between Virtual and Real Controllers
You can load all saved settings and files from virtual controllers in real controllers. You can
also load all settings and files from real controllers in virtual controllers. You must only take
special steps with the Scenarios, which we have described as follows:
17.3.1 Transfer Scenarios from Virtual Controllers to Real
Controllers