KLING & FREITAG K&F CD Remote - Manual (Page 30)

User's manual K&F CD 44 Remote
KLING & FREITAG GMBH © 2014 Version 5.5 Page 30 of 50
14. Setting Filters, Limiters and Delays
You can change the individual settings for filters, the connected speakers for every channel,
delays, limiters, etc. after having selected the corresponding routing and input patching for
the current system configuration. The relevant icons appear in the lower area of the device
window.
14.1 Overview of the Symbols
Icon Function (shown on mouseover)
31 band 1/3rd octave EQ (see EQ 31 Band
in the hardware manual) (CD 44 only)
Filters (see Parametric Filters and High
Boost, Cluster, and Bass Boost Filter on in
the hardware manual.)
Connected speakers (see Select LSBlock in
the hardware manual.)
Limiter (see LimReduction in the
hardware manual.)
Input and Output Gains (see chapter
Gains in the hardware manual.)
Delay (see chapter Delay in the hardware
manual.) (The input delay is only available
for the CD 44.)
Outputname
Amp Gain (see AmpGain in the hardware
manual.)
14.2 Changing Parameters
Follow the instructions for the individual settings in the hardware manual. You can change
the setting as follows:
1. Double click the relevant [Icon].
2. Set the desired value.
3. Push the enter button on the PC keyboard if you have entered the values on the
keyboard so that the setting will be run.
You can also make all entries using the arrow buttons or the scroll wheel of the mouse. You
can also simultaneously hold down the [Ctrl] button to increase and [Alt] to decrease the
increments.