KBC Networks WESII - Manual (Page 131)

WESII User Manual
Manual-WESII-Rev1403
Copyright © KBC Networks 2014
Page 130 of 140 www.kbcnetworks.com
Automatic: The frequency used can be selected automatically on the Host/AP unit. To
do this, select the Basic Wireless: Radio 1 option and ensure the ‘Auto’ box next to the
Channel-Frequency is ticked. The frequencies available to be automatically selected will
be based on both the Country Code and Spectrum width chosen.
Manual setting: The frequency can also be selected manually, this is necessary if there
are more than one WESII links on a site. It is recommended that an Interference
Analyzer survey is conducted to determine which frequencies are the least congested to
use. See the Interference Analyzer section below for details.
Setting the Host/AP frequency:
On the Host/AP unit in the Basic Wireless: Radio 1 option use the drop down menu to
choose a unique frequency for the link you are setting up. Frequencies available will
depend upon the Country Code Spectrum Width selected. Once a frequency has been
selected select .
US firmware version
Note: on the EMEA firmware versions you can choose whether to include the 5600 –
5650MHz band. If these frequencies are included the link connection time can increase to
10 mins due to Dynamic Frequency Selection (DFS) regulations see page 7.
EMEA firmware version
Select: BASIC WIRELESS: Radio 1 on
the Host/AP unit
Ensure that the ‘Auto’ box is checked