KBC Networks WESII - Manual (Page 117)

WESII User Manual
Manual-WESII-Rev1403
Copyright © KBC Networks 2014
Page 116 of 140 www.kbcnetworks.com
System: DEVICE MAINTENANCE
Reboot: this performs a re-boot to the unit, this can take up to 1 minute to perform.
Reset to defaults: In this menu option the unit can be soft rebooted or reset to
defaults.
The default configurations are as follows:
Host/AP LAN Configuration:
192.168.1.200
255.255.255.0
No Gateway IP
Client LAN Configuration: 192.168.1.201
255.255.255.0
No Gateway IP
Interface Access Username: admin
Interface Access password: admin
Hostname: AP (for the Host/AP)
CLIENT (for the Client)
Remote Client-Lock to MAC: 00:00:00:00:00:00
Local AP-ESSID: KBC-WESII
Country Code: USA (North America)
Select Country (all other countries)
Wireless Profile:
NA (IEEE802.11n & IEEE802.11a)
NG (IEEE802.11n, IEEE802.11 g)
NY (IEEE802.11n & IEEE802.11y)
Channel Spectrum Width: 20/40M
Channel-Frequency: set to auto-select
Transmit Power: 23 dBm (North America)
19 dBm (all other countries)
Local AP WPA Cipher: AES
Local AP Preshared Key: 11111111
Long Range Parameters: Enabled
RSSI LEDs: LED1=10; LED2=20; LED3=30; LED4=40
The Administrator Username can also
be changed. It does not need to be
‘admin’ to change the password.
The default password is ‘admin’
Change the password here and verify
below