ILUMINARC LΩGIC™ 4X36 - Manual (Page 6)

Introduction
2
LΩGIC™ 4X36 User Manual (Rev. 10)
There are no
user serviceable
parts inside this
product. Any reference to
servicing it you may find
from now on in this User
Manual will only apply to
properly ILUMINARC
®
certified technicians. Do
not open the housing or
attempt any repairs
unless you are certified to
do so.
Please refer to all
applicable local
codes and
regulations for the proper
installation of this product.
Keep this manual
for future
consultation. If
you sell this product to
another user, make sure
that they also receive this
manual.
In the unlikely
event that your
LΩGIC™ 4X36
may require service,
please contact
ILUMINARC
® Technical
Support.
Safety Notes
Please read all the following safety notes carefully because they include important
information on how to install, use, and maintain this product safely.
Personal Safety
· Avoid direct eye exposure to the light source while the product is on.
· Always disconnect this product from its power source before servicing.
· Always connect this product to a grounded circuit to avoid the risk of electrocution.
Mounting and Installation
· This product is for indoor use only! To prevent risk of fire or shock, do not expose this
product to rain or moisture.
· Make sure there are no flammable materials close to this product while operating.
Power and Wiring
· Always make sure that you are connecting this product to the proper voltage, as per the
specifications in this manual or on the product’s sticker.
· Never connect this product to a dimmer pack.
· Make sure that the power input cable is not cracked, crimped, or damaged.
· Never disconnect this product by pulling or tugging on the power input cable.
Operation
· The maximum ambient temperature (Ta) is 104° F (40° C). Do not operate this product
at a higher temperature.
· In case of a serious operating problem, stop using this product immediately!