beautypg.com

Whites setting, Set time and date, Set schedule – ILUMINARC LΩGIC™ 4X36 User Manual

Page 17: Playing schedule, Password, Upload customs, Reset

background image

Operation

LΩGIC™ 4X36 User Manual (Rev. 10)

13


































Whites Setting

1. Go to MENU>SETTINGS>CALIBRATION.

2. Select a white color WHITE 1~9 or RGB TO WHITE.

3. Set a color R, G, or B.

4. Configure the color value [000~255].

5. Repeat steps 2 thru 4 for the other RGB colors to obtain a white color.

Set Time and Date

1. Go to MENU>SETTINGS>CLOCK>EDIT TIME.

2. Set Year, Day Of Week, Day, Month, Hour, Min, and Sec.

Set Schedule

1. Go to MENU>SCHEDULE. A day of the week or “EVERYDAY” will show on the

LCD.

2. Select DOW or EVERYDAY.

3. Select NO. [01~10].

4. Set CUSTOM [01~10], STATIC, RGBL [01~10], RGB [01~10], or PLAY NONE.

5. Set Start time [00:00 to 23:59].

Set End time [00:00 to 23:59].

Playing Schedule

1. Go to MENU>PLAY SCHEDULE.

The Password is
fixed by default.
It is not able to

be changed.





If the upload is
successful, all the

products will show
”Success” on the LCD.












Password

When KEYLOCK is active, the product will ask you to enter the password (,
, , and ) after 30 seconds of control panel inactivity or upon
power up.

1. Go to MENU >SETTINGS.

2. Select ON/OFF.

Upload Customs

1. Set all products that are going to receive the upload to SLAVE operation.

2. Disconnect the products from the DMX controller.

3. On the product whose custom programs you are going to copy, got to MENU

>SETTINGS and select UPLOAD.

4. Enter the password and press for the upload to start.

Reset

1. Go to MENU>SETTINGS.

2. Select RESET CUSTOM (resets custom programs), RESET SCHEDULE (resets

schedule), or RESET ALL (resets entire product to factory default).

3. When YES shows, press .

This manual is related to the following products: