ILUMINARC LΩGIC™ 4X36 - Manual (Page 16)

Operation
12
LΩGIC™ 4X36 User Manual (Rev. 10)
AUTO 01~10 are
fully configured
programs and
cannot be modified.
However, CUSTOM
01~10 programs are fully
customizable (see Edit
Custom).
AUTO 01~10
consist of two (2)
different, fully
configured programs
giving the user a total of
twenty(20) different auto
programs to choose from.
Master/Slave
On the Master product:
1. Go to MENU>OPERATION and select DMX.
2. Go to MENU>PLAY AUTO and select any Auto program.
On each of the Slave products:
1. Go to MENU>OPERATION and select SLAVE.
The slave products will follow the program played by the Master.
Static Colors
1. Go to MENU>PLAY STATIC.
2. Select an output line L [1~4]
3. Select a color or effect RED, GREEN, BLUE, DIMMER, and STROBE.
4. Select a color value [000~255] or a strobe frequency [0~20].
Auto Play
1. Go to MENU>PLAY AUTO.
2. Select a program RGB, or RGBL [01~10].
3. Select a speed SP [001~255].
Custom Play
1. Go to MENU>CUSTOM.
2. Select a program CUSTOM [01~10].
Edit Custom
1. Go to MENU>EDIT.
2. Select a program C-[01~10].
3. Select a scene S-[01~20].
4. Select a color R, G, or B.
5. Configure the color value [000~255].
6. Repeat steps 4 and 5 for the other colors.
7. Configure the strobe frequency S [00~20].
8. Configure the Step and Fade timers [000~255].
9. Repeat steps 4 to 8 for the other scenes.
RGB to White Setting
When RGB TO W is active, the product will automatically use the RGB values for a
balanced white look. When inactive, the product will use the most powerful intensity.
1. Go to MENU>SETTTINGS>RGB TO WHITE.
2. Select YES or NO.