ILUMINARC LΩGIC™ 4X36 - Manual (Page 15)

Operation
LΩGIC™ 4X36 User Manual (Rev. 10)
11
4. Operation
When running
the product
using a DMX
controller, make sure that
the Menu>Run is set to
DMX.
Control Panel Description
Button Function
Exits from the current menu or function
Enables the currently displayed menu or sets the currently selected value in
to the current function
Navigates upwards through the menu list and increases the numeric value
when in a function
Navigates downwards through the menu list and decreases the numeric
value when in a function
Control Options
You can set the
LΩGIC™ 4X36 start address in the 001~512 DMX range. This allows for
the control of up to 34 products in the 15-channel RGB+LINE+DMS personality.
Programming (RGB Mode)
Refer to the Menu Options section to learn how the menu options relate to each other. The
Menu Options section has a Main level and a variable number of programming levels for
each option.
· To go to an option in the Main level, press
shows on the display. Press to select. This will take you to the first
programming level for that option.
· To select an option or value within the current programming level, press or
until the option or value is displayed. Press to accept. If there is
another programming level, you will see that level’s first option. If not, you will see
the selected value.
· To exit to the previous menu level, press
Mode Selection
1. Go to MENU>SETTINGS.
2. Select GOTO RGB.
3. Select YES?
DMX Addressing
1. Go to MENU>DMX ADDRESS.
2. Select the starting address [001~512].
3. Go to MENU >OPERATION.
4. Select DMX.
DMX Personality
1. Go to MENU>PERSONALITY and select any DMX personality.
2. Make sure to rearrange the DMX addresses of all products in the current DMX universe
to avoid address overlapping.