ILUMINARC LΩGIC™ 4X36 - Manual (Page 18)

Operation
14
LΩGIC™ 4X36 User Manual (Rev. 10)
Programming (SpectraWhite™ Mode)
Refer to the Menu Options section on page 20 to learn how the menu options relate to each
other. The Menu Options section has a Main level and a variable number of programming
levels for each option.
· To go to an option in the Main level, press
shows on the display. Press to select it. This will take you to the first
programming level for that option.
· To select an option or value within the current programming level press or
until it shows on the display. Press to accept it. In this case, if
there is another programming level, you will see its first option. Otherwise, you
will see the selected value.
· To exit to the previous menu level, press
Mode Selection
1. Go to MENU>SETTINGS.
2. Select GOTOWHITE.
3. Select YES?
DMX Addressing
1. Go to MENU >DMX ADDRESS.
2. Select the starting address [001~512].
3. Go to MENU >OPERATION.
4. Select DMX.
DMX Personality
1. Go to MENU>PERSONALITY and select any DMX personality.
2. Make sure to rearrange the DMX addresses of all products in the current DMX universe
to avoid address overlapping.
Master/Slave
On the Master product:
1. Go to MENU>OPERATION and select DMX.
2. Go to MENU>MOOD.
3. Select COOL, WARM, or NATURAL.
4. Select DIM[000~255]
On each of the Slave products:
1. Go to MENU>OPERATION and select SLAVE.
The slave products will follow the program played by the Master.
Static Colors
1. Go to MENU>PLAYSTATIC.
2. Select an output line L [1~4].
3. Select a color or effect COOL, WARM, DIMMER, and STROBE.
4. Select a color value [000~255] or a strobe frequency [00~20]
Auto Play
1. Go to MENU>MOOD.
2. Select a program COOL, WARM, or NATURAL.
3. Select DIM [000~255].