ILUMINARC LΩGIC™ 4X36 - Manual (Page 12)

Installation
8
LΩGIC™ 4X36 User Manual (Rev. 10)
When
connecting
LΩGIC™
products to the
LΩGIC™ 4X36 controller,
do not exceed the
maximum of 12 LEDs per
output channel (36 LEDs
total for the output line).
Maximum Output Line Loading
The
LΩGIC™ 4X36 product has four output lines. This means that the user can combine
various output lines to create zones. Each output line has three channels whose names
change depending on the selected operation mode.
· RGB mode: Red, Green, and Blue
· SpectraWhite™ mode: Warm, Natural, and Cool
Each channel can support up to twelve (12) LEDs. As a result, the maximum number of
LEDs supported by an output line is 36.
Inside the
LΩGIC™ products, the LEDs are grouped in clusters of three LEDs each. In an
LED cluster, each LED connects to an individual output channel from the
LΩGIC™
product. When a product has more than one cluster, the same output channel supports as
many LEDs as clusters the product has.
Please see the guide below for the output line loading. This table shows the maximum
number of a single type of products that can be loaded onto each of the
LΩGIC™ 4X36’s
output lines.
M ODEL N AME T OTAL LED’ S
M AX . NUMBER OF
CONNECTED PRODUCTS
PER OUTPUT
Ilumiline LΩGIC™ 36 RGB
36 1
Ilumiline LΩGIC™ 24 RGB
24 1
Ilumiline LΩGIC™ 24 Optic RGB
24 1
Ilumiline LΩGIC™ 12 Optic
12 3
Ilumiline LΩGIC™ 12
12 3
Ilumipod LΩGIC™ 12 Optic
12 3
Ilumipod LΩGIC™ Tri-4
12 3
Ilumipod LΩGIC™ 6 Optic
6 6
Ilumipod LΩGIC™ 3 Optic
3 12
Ilumipod LΩGIC™ Tri-1
3 12
You may also combine different products together, as long as you do not exceed the
maximum of 36 LEDs per output line. Please see the following example of a possible
combination.
Ilumipod
LΩGIC™ Tri-4
12 X 2 = 24 2 products
Ilumipod
LΩGIC™ 6 Optic
6 x 2 = 12 2 products
Total 36 LEDs 4 products