DekTec DTC-300 StreamXpress - Manual (Page 62)

DTC-300-SP – StreamXpress
USER MANUAL
62
-p params : modulation parameters
-v : verbose
params: use ',' to separate parameters
output_format : raw(default)|b15
tmode[i] : bpsk1/2|qpsk1/2|qpsk2/3|qpsk3/4|qpsk5/6
|qpsk7/8|8psk2/3(default) (i < 5)
slot_count[i] : 0..48(default slot_count[0]=48) (i < 5)
relts[k,k,..k] : 0..7 represent TS index (default=0, 48 positions)
tsid[k] : 0..65535 (default=0) (k < 8)
start_up_signal: 0:default, 1:for emergency signalling
Examples:
IsdbsMux -o output.ts input.ts
IsdbsMux -v -p tmode[0]=8psk2/3,slot_count[0]=19,tmode[1]=qpsk5/6,slot_count[1]=
12,tmode[2]=qpsk3/4,slot_count[2]=8,tmode[3]=qpsk2/3,slot_count[3]=9 -o output.t
s input.ts
IsdbsMux -p tmode[0]=8psk2/3,slot_count[0]=46,tmode[1]=qpsk1/2,slot_count[1]=2,r
elts=[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,1, 1,1,1,1,1,1,1,1,1,1,1,1,1
,1,1,1,1,1,1,1,1,1,0,0],tsid[0]=0x40f1,tsid[1]=0x40f2 -o out.ts ts1.ts ts2.ts
When loading an ISDB-S file, the StreamXpress interface will look like this:
3.6 Playing a Transport Stream though an Ethernet interface
The StreamXpress supports the playout of CBR transport streams over different interfaces. Following
the DVB-IPI protocol, DekTec supports multiple DekTec Ethernet Adaptors that can generate TSoIP
signals. The following are StreamXpress setting specific to playing a transport stream over TSoIP
interfaces.