DekTec DTC-300 StreamXpress - Manual (Page 46)

DTC-300-SP – StreamXpress
USER MANUAL
46
Variable Type Description Details Diag
Enable Tick Box Enable the use of FEF parts #1 1
Type Drop
Down
Select the type of FEF used #2 2
S1 Drop
Down
Select the value of the S1 signalling field #3 3
S2 Drop
Down
Select the value of the S2 signalling field #4 4
Signal Drop
Down
Select the type of generated signal during the FEF period #5 5
length Field Select the length of the FEF part #6 6
Interval Field Select the interval between 2 FEF parts #7 7
#1 Enable (FEF):
Tick this box to unable the use of FEF, which is optional.
#2 Type:
This 4-bit field shall indicate the type of the associated FEF part. At this time all values are undefined
and reserved for future use.
#3 S1:
This field represent the value of the S1 signalling that would be used for FEF. Only the reserved
(unused) value of the S1 parameters are available (2, 3, 4, 5, 6, 7) as this field is not currently
defined and reserve for future use.
#4 S2:
1
2
5
3
4
7
6