DekTec DTC-300 StreamXpress User Manual
Page 5
DTC-300-SP – StreamXpress
USER MANUAL
5
Combined Rates ≤ 100Mb/s use single 7200 RPM SATA
Combined Rates > 100Mb/s use 10000 RPM SATA
Combined Rates > 200Mb/s use SSD drive (Solid State Disk)
NOTE: Drive specifications are recommendations. Different architectures will yield different results in
some systems.
1.4 DekTec hardware compatible products
The DTC-300-SP is compatible with the following DekTec hardware:
Signal Type
Supported Adapters
DVB-ASI
DTA-100, DTA-105, DTA-112, DTA-115,
DTA-140, DTA-2136, DTE-3100, DTU-205
ASI/SDI
DTA-145, DTA-160, DTA-545, DTA-2137,
DTA-2142, DTA-2144, DTA-2145,
DTA-2152, DTA-2154, DTA-2160,
DTA-2162, DTA-2174, DTU-205, DTU-245
DVB-SPI
DTA-102, DTA-2142
Modulators
DTA-107, DTA-107S2, DTA-110, DTA-111,
DTA-112, DTA-115, DTA-116, DTA-117,
DTU-215, DTA-2107, DTA-2111, DTA-2115
TSoIP
DTA-160, DTA-2160, DTA-2162
I/Q Samples
DTA-115, DTA-116, DTA-117, DTU-215,
DTA-2107, DTA-2111, DTA-2115
1.5 Applications
Typical applications of StreamXpress include:
ASI Streaming
Using a USB or PCI/PCIe DekTec device supporting ASI output, StreamXpress can stream 1 MPEG-2
TS per ASI output port. For DekTec products that have software selectable bidirectional ASI ports, use
DtInfo for changing input ports into output ports.
IP Streaming
Using a PCI/PCIe DekTec device supporting an Ethernet connection, StreamXpress can stream
multiple MPEG-2 TS over the DekTec Ethernet port. Note that StreamXpress does not have a limit on
how many streams can be streamed over the Ethernet port, it is only limited by the PC resources.
StreamXpress can also stream over a standard NIC card. You need a dongle license for this option
to be available.
Modulated TS streaming
Using a USB or PCI/PCIe DekTec device supporting RF outputs, StreamXpress can stream 1 MPEG-2
TS per RF output port. StreamXpress allows changing RF modulation settings and supports the