DekTec DTC-300 StreamXpress - Manual (Page 18)

DTC-300-SP – StreamXpress
USER MANUAL
18
- For DVB-C: the RF frequency, symbol rate and QAM constellation are set to the values found in the
CDSD
- For DVB-T: the RF frequency and DVB-T parameters are set to the values found in the TDSD
3.3 Display Transport Stream information
Upon opening an MPEG-2 TS StreamXpress will read the data from the opened TS file and display
some valuable information for the user. There are 3 main areas of display:
 Transport Stream Info
 PID Info
 File Info
3.3.1 Transport Stream info
The first window from the left represents the Transport Stream Info. It will display the following
information if it’s available in the stream:
-Transport Stream ID.
-Each program detected into the stream.
-Program name and total bitrate for the program.
-Under each program: PID#, Stream_type, Stream_ID and bitrate of each component.
3.3.2 PID info
The second window from the left represents the PID Info. It will display the following information if
it’s available in the stream:
-Each PID and its association with a program number.
-Bitrate of the PID.
-PCR presence.