Dan Dugan Sound Design E - Manual (Page 45)

Dugan Model E User Guide
45
Chapter 8: Specifications
Specifications
Audio Inputs unbalanced, 6 KOhm
, -22 to +4 dBu nominal level, +21 dBu maximum
Audio Outputs
unbalanced, 100-Ohm source, drives a 600-Ohm load, +21 dBu
maximum
Output Noise less than -91 dBu (A-weighted); 112 dBA dynamic range
Alternative
Digital I/O ADAT optical, 48 KHz/24 bit, (8 channels only; units cannot be
linked when using digital I/O)
Frequency
Response
10 Hz to 22 KHz, +0/-1 dB
Crosstalk -81 dB @ 20 KHz
Distortion less than 0.003% THD+N at +21 dBu
Gain unity
A/D and D/A 48 KHz/24 bit (will operate with 44.1 KHz digital I/O)
Audio Latency 0.6 ms
Linking
optical, up to 8 units (64 channels) may be linked in a ring; links with
Models D-2 and D-3
Connectors
Audio: 1/4-in TRS; tip input, ring output
10/100 BASE T: RJ-45
Linking or Digital I/O: ADAT optical
Power: coaxial
5.5 mm o.d., 2 mm i.d.
Power
nominal 12 VDC 1.3 A maximum; accepts 9–24 VDC, either polarity,
or 9–18 VAC
separate power supply unit; input 120 VAC, 60 Hz, 27 W; output
12 VDC, 1.5 A; Approved UL, CUL
Dimensions
1RU H = 1.75 in (4.5 cm) D = 8.3 in (21 cm) W = 8.75 in (22.2 cm)
adapters supplied for mounting one or two units in 1RU of 19-in rack
Weight
3.3 lb (1.5 kg)
5.0 lb (2.3 kg) in shipping box with power supply