Dan Dugan Sound Design E - Manual (Page 39)

Dugan Model E User Guide ASCII Remote Control
39
System Override
This command queries and sets the system override status.
1 = override active for all channels, 0 = system override disabled
Query
Set
System Preset
This command sends a master (system) preset command causing all channels to go to
their channel preset mode.
1 = set channel mode to preset value for all channels, 0 makes the preset button on the
Web interface turn off. SP 1 should always be followed by SP 0.
Factory Preset
This command, like the System Reset command on the Web Remote Control Panel, re-
sets the unit to its factory presets. The result is the same as booting up with Bypass 1
held down. This does not change the network settings or the analog/digital I/O mode.
For example:
Example Meaning
Sent SO What is the system override status?
Reply SO 1 System override = enabled
Example Meaning
Sent SO 0 Disable system override
Reply SO 0 System override = disabled
Example Meaning
Sent SP 1 Send a system preset command
Reply SP OK OK = successfully executed
Example Meaning
Sent FP Reset factory presets
Reply FP OK OK = reset accomplished