Dan Dugan Sound Design E - Manual (Page 29)

Dugan Model E User Guide Web Control Panel
29
The control panel in the right pane mimics all the Speech System controls of a
Model D-2 or D-3. Since the Model E has no Music System algorithm, those controls
do not appear.
The Model E does not have groups. If linked with a D-series mixer, the Model E’s
channels are assigned to
group a .
Since the Model E’s front panel has no man button, Manual mode is displayed as full gain.
The channels and the unit itself can be named by entering text in the windows. Channel
naming is cleared by a System Reset (see System Reset on page 17) and the unit’s name
is cleared by a Network Preset (see Network Reset on page 17).
As in the D-series, all settings are retained when the control panel is disconnected or
powered off. When the unit powers up, channel modes are set to the
Preset settings.
To quickly control multiple units, open a browser tab or window for each Model E.
5.2.1 Auto Mix Weight
Figure 5-5 Auto mix weight control
The auto mix weight controls set the relative sensitivity of the automatic mix for the
channels in use. When the auto mix weight controls are balanced, each mic has an
equal opportunity to take over the system: when one person talks into one mic, he/she
gets all the gain and the others get turned down.
The weight controls can be used to balance the channel gains when no one is talking.
If a board preamp trimmer is turned down, that channel’s weight control can be turned
up to re-balance the automixing, and vice-versa. Weights can be changed by dragging
the sliders or by entering dB values in the windows below the sliders.