Dan Dugan Sound Design E - Manual (Page 31)

Dugan Model E User Guide Web Control Panel
31
For optimal performance, balance the auto mix weight controls so the channel gains display
approximately equally when no one is talking. If there is ongoing noise near one mic (i.e.,
computer fan or air vent), suppress it by reducing that channel’s
auto mix weight.
See Chapter 4: Operation for further details on automatic mixing operation.
5.2.2 Logic Functions
Override
The override button in the master control section fades all the channels full up or mute,
depending on the states of the override buttons for the individual channels. Override is
a momentary function, active only while the master override button is held down.
Select the channel(s) to include in the override group by activating their override but-
ton(s). These channels come up full when the master override button is held down; all
other channels are muted.
Preset
The master preset button sets the modes (manual, auto, mute) of the channels to the
setting shown on the preset LED for each channel. Use these settings to store your most
commonly used pattern of channel usage, which may be restored by pressing the master
preset button. The channels are in their preset modes when the unit is powered up.
Figure 5-7 Channel (left) and Master (right) preset buttons