Dan Dugan Sound Design E - Manual (Page 27)

Dugan Model E User Guide Web Control Panel
27
If the unit is connected directly to the computer:
1. Choose an IP address that matches your computer’s first three groups of digits
and a last group that is one integer higher.
2. Click Change .
If the unit is connected to a switch or router:
1. Select the Use DHCP checkbox.
2. Click Change .
The unit reboots with the new IP address and appears in the left pane. If the unit does
not appear in the left pane, click
Refresh . If the display is incomplete, quit the browser
entirely and relaunch it by dragging index.htm to the browser’s icon.
For IT Experts
The Control Panel in the right pane will not work until the unit and computer belong to
the same subnet. The subnet masks of both must also be identical. For example, if the
subnet mask is 255.255.255.0 and the computer’s IP address is 192.168.1.123, the
Model E subnet mask must also be 255.255.255.0 and the IP address must be of the
form 192.168.1.x where x is a number not already assigned to another computer or device.
With a Windows firewall, enter the Model E’s address directly in the browser’s address
field. The unit may not show up in the list because the response to a broadcast packet
is rejected by the firewall but the control panel will still work.
The Model E can be controlled over the Internet (port 9776), but only those with advanced
network skills should attempt this.