Dan Dugan Sound Design E - Manual (Page 32)

Dugan Model E User Guide Web Control Panel
32
To set channel presets:
1. Click the channel preset button until the LED displays the desired setting.
2. For all unused channels, click the preset button until mute is selected.
The preset indicators should mirror your normal working combination of input modes.
The normal condition can then be restored by pressing the master
preset button. This
is also the state in which the system powers itself up.
Mute
The master mute button is a momentary function that rapidly fades out (0.5 s) all channels
while held down.
Bypass Mode
Each channel has a bypass mode. A channel may be patched directly through the Dugan
with the
bypass switch. That channel’s lights extinguish and the bypass LED illuminates.
All analog I/O is bypassed when the power is off so it is not necessary to unpatch the
Model E when not in use.
NOTE: After all controls have been set, the Web Remote Control Panel can be dis-
connected. The Model E remembers all settings, even after the power is
turned off.