4) reorient or relocate the receiving antenna, Operating system, Technical specifications – CRU Forensic ComboDock v5 User Manual
Page 9: Cru-wiebetech

CRU-WiebeTech
Forensic ComboDock v5 User Manual A9-000-0041 REV 1.0
- 9 -
Tested to comply
with FCC standards
FOR OFFICE OR
COMMERCIALUSE
7. Technical Specifications
Product Name
Forensic ComboDock v5
Drive Compatibility
•
2.5-inch & 3.5-inch SATA drives
•
3.5-inch IDE/PATA drives
•
Additional types using optional adapters
Host Interfaces
•
USB 3.0 (USB 2.0 when switch is set to USB 2.0 mode)
•
eSATA 3G
•
FireWire 800 (two ports, daisy-chainable)
•
FireWire 400
Power Supply
Input: 100-240VAC; Output: +12V 3.5A
Operating System
•
Windows 7, Vista, XP
•
Mac OS X
•
Linux distributions supporting the desired connection type
Unit Dimensions
75 mm x 110 mm x 27 mm
Shipping Weight
4 pounds, including accessories
Compliance
CE, FCC
Support
We don’t expect anything to go wrong with your product. But if it does, Tech Support is
standing by and ready to help. Contact us through
www.cru-dataport.com
or call
(800) 260-9800
.
ComboDock and WiebeTech are trademarks of CRU Acquisitions Group, LLC. Other marks are the property of their respective
owners.
© 2008, 2012 CRU Acquisitions Group, LLC. All rights reserved.
Limited Product Warranty
CRU-DataPort (CRU) warrants Forensic ComboDock to be free of significant defects in material and workmanship for a period of
two years from the original date of purchase. CRU’s warranty is nontransferable and is limited to the original purchaser.
Limitation of Liability
The warranties set forth in this agreement replace all other warranties. CRU expressly disclaims all other warranties, including but
not limited to, the implied warranties of merchantability and fitness for a particular purpose and non-infringement of third-party rights
with respect to the documentation and hardware. No CRU dealer, agent or employee is authorized to make any modification,
extension, or addition to this warranty. In no event will CRU or its suppliers be liable for any costs of procurement of substitute
products or services, lost profits, loss of information or data, computer malfunction, or any other special, indirect, consequential, or
incidental damages arising in any way out of the sale of, use of, or inability to use any CRU product or service, even if CRU has
been advised of the possibility of such damages. In no case shall CRU’s liability exceed the actual money paid for the products at
issue. CRU reserves the right to make modifications and additions to this product without notice or taking on additional liability.
FCC Compliance Statement: “This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.”
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a
home or commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio communications.
In the event that you experience Radio Frequency Interference, you should take the following steps to resolve the problem:
1) Ensure that the case of your attached drive is grounded.
2) Use a data cable with RFI reducing ferrites on each end.
3) Use a power supply with an RFI reducing ferrite approximately 5 inches from the DC plug.
4) Reorient or relocate the receiving antenna.