CRU Forensic ComboDock v5 User Manual
Forensic combodock™ v5, User manual, Features
Forensic ComboDock v5 User Manual A9-000-0041 REV 1.0
- 1 -
Forensic
ComboDock™ v5
User Manual
Revised September 17, 2012
Features
•
Dual mode: Write-block and Read/write
•
Four separate host attachment options (USB 3.0, FireWire 800, FireWire 400, and
eSATA) for compatibility with virtually any computer
•
Multiple LEDs indicate operational status, including disk activity, hidden area
detection, error state, and the status of power input and output
•
LCD menu allows user to configure settings and view information on attached drives
•
Detects and indicates hidden areas (HPAs or DCOs) found on hard drives
•
Able to create HPAs and DCOs
•
All-aluminum case for rugged durability and excellent heat dissipation
This manual is related to the following products:
Table of contents
Document Outline
- Forensic ComboDock™ v5
- User Manual
- Forensic Device User Advisory
- In the event that you experience Radio Frequency Interference, you should take the following steps to resolve the problem:
- 1) Ensure that the case of your attached drive is grounded.
- 2) Use a data cable with RFI reducing ferrites on each end.
- 3) Use a power supply with an RFI reducing ferrite approximately 5 inches from the DC plug.
- 4) Reorient or relocate the receiving antenna.
- Operating System