CRU RAX840-IR - Manual (Page 6)

CRU
Note: Drives must be marked as Free Disks before they can be added to a RAID Group.
c) All available Free Disks will be displayed. Check the drives that you wish to add to the RAID
Group, then click “Confirm”.
d) The selected Physical Disks will now be displayed in the RAID Group creation screen. Enable or
Disable Write Cache, Standby, Readahead, and Command Queuing based on your needs. Most
RAID Groups will be fine with the default settings. Then click “Next” to proceed to the confirmation
screen.
R A X 8 4 0 - I R Q u i c k S t a r t G u i d e A 9 - 8 4 0 - 0 0 0 4 - 1 R E V 1 . 0 - 6 -