Crompton Controls M20 - Manual (Page 24)

Emotron AB 01-2551-01r4 Programming 23
Programming
1. Go to window 01.
2. Press and hold and simultaneously for 3 seconds.
3. The next unit of measurement is set and appears for 2 sec (see examples).
Repeat to select the desired measurement unit according to the table.
* Measured shaft power as % of rated power.
RESET RESET
12
01
% % kW
4.62
01
kW kW
12
01
%
HP
%
3.52
01
HP Horsepower:
absolute value
Horsepower:
relative value*
Kilowatt:
absolute value
Kilowatt:
relative value*
(default)
For 2 seconds Read-out example