CONTA-CLIP EMS-Engraver User Manual
Page 15
10. Technical data
Environmental conditions
Operation: 10
o
C (50
o
F) up to 35
o
C (95
o
F)
for all units
rel. Humidity: 35% to 75% no condensation
Storage: -10
o
C (14
o
F) up to 50
o
C (122
o
F)
rel. Humidity: 10% to 90% no condensation
Safety certificate:
EN 60950-1
Interference safety compliance:
EN 55022 B
EN 61000-4-2 to 6
EN 61000-4-11
EN 61000-3-2 and 3
10.1 Engraving Spindle
Revolution speed:
min. 5000 RPM, max. 50.000 RPM
Torque:
6 Ncm
Frequency:
83-830 Hz
Power consumption:
max. 60 W
Clamp:
Shaft diameter 3 mm (.118 inch)
Clamp mechanism:
Head clamp
Revolution accuracy with clamp:
.03 mm (.00118 inch)
Motor details:
Three-phase asynchronous, brushless
Housing:
Aluminum
Holding diameter:
25 mm (.984 inch)
Ball bearing:
Double, steel, permanent lubricated
Cooling:
Air through integrated fan
Weight:
approx. 280 g (.62 pounds)
Overall length:
approx. 175 mm (6.89 inch)
Usage:
Engraving only
Guaranteed bearing lifetime :
min. 1000 hours at appropriate
usage
10.2 Engraver-Controller (EC)
Voltage supply:
110-240 V ~ 50-60 Hz
Mains fuse:
4A, slow-blow
Measurements:
180 mm x 250 mm (7.08 inch x 9.84 inch)
Weight:
approx. 2.7 kg (5.95 pounds)
10.3 Engraver-Vacuum-Cleaner (EVC)
Input voltage:
24 VDC
Power consumption:
max. 55 W
Vacuum cleaner bag:
Swirl Type Y98
Measurements:
350 mm x 250 mm (13.78 inch x 9.84 inch)
Weight:
approx. 4.6 kg (10.15 pounds)
14