CIRCUTOR CVM-NRG96 Series (Available until stocks) - Manual (Page 28)

CVM-NRG96
M9817250120-03-05A
28
To write or change the number of the peripheral repeatedly press the MAX
key increasing the value of the digit which is flashing at the time.
When the required value is on the screen, move on to the following digit by
pressing MIN, to allow the remaining values to be changed.
When the last digit has been changed, press MIN to move back to the first
digit, allowing the previously set values to be changed again.
The peripheral number varies between 0 and 255 (0 and FF in hexadecimal)
To enter the data and access the following setting step, press
.
Transmission speed
The display shows ” m_n{\[o^{l[n_{30**”
{M?n
{\[o^
{l[n_
{30**
To vary the peripheral transmission speed repeatedly press MAX changing
the value of the different communications options.
Available speeds are: 1,200, 2,400, 4,800, 9,600 or 19,200 bps.
Once the required selection has been made, the next setting step is
accessed by pressing the
key
.
Parity
The display shows ” m_n{j[lcns{hi”
To select one of the two display options, just press the MAX key and the two
options will alternate.
{m_n
{J[lc
{ns
{hi
{M_n
{J[lc
{ns
{s_m