CIRCUTOR CVM-NRG96 Series (Available until stocks) - Manual (Page 17)

CVM-NRG96
M9817250120-03-05A
17
Transformer Voltage Secondary
The display shows “ m_n{ Oifn{ M_] followed by three digits; these
allow the setting of the transformer voltage secondary.
{M_n
{Oifn
{M_]
{{**+
To write or change the value of the transformer secondary value repeatedly
press the MAX key increasing the value of the digit which is flashing at the
time.
When the required value is on the screen, move on to the following digit by
pressing MIN, to allow the remaining values to be changed.
When the last digit has been changed, press MIN to move back to the first
digit, allowing the previously set values to be changed again.
To enter the data and access the following setting step, press
.
Transformer current primary
The display shows ” m_n{=oll{JlC” followed by five digits; these allow
the setting of the transformer current primary.
{M_n
{=oll
{JlC
****+
To write or change the value of the transformer primary value repeatedly
press the MAX key increasing the value of the digit which is flashing at the
time.
When the required value is on the screen, move on to the following digit by
pressing MIN, to allow the remaining values to be changed.
When the last digit has been changed, press MIN to move back to the first
digit, allowing the previously set values to be changed again.
To enter the data press
.